Christie use cookies to enhance you user experience while visiting our website, to provide social media features, to serve targeted advertising and to analyse traffic. By clicking 'Accept', closing this message or continuing to use this site, we consider that you agree to our use of cookies in accordance with our Cookie Notice

Christie D13WU-HS

1DLP laser projection in HD resolution with super-quiet operation

Achieve high-precision images with a compact, super quiet projection solution. Christie® D13WU-HS offers the world’s brightest 1DLP®​ laser projector boasting up to 13,000 lumens in HD resolution, with Christie BoldColor Technology​.​

Key features include

  • Unparalleled colour reproduction​​
  • Quick, easy warping and blending
  • Stable, consistent performance – 24/7
  • Easy to handle and install with a lightweight, compact design
  • Backed by industry-leading warranties and service
  • DICOM simulation mode for training purposes

Tick   In stock

  • Specification
  • Downloads
  • Accessories & Lenses
  • Comparison chart
  • Videos & case studies
  • Warranty & Service
Image

Brightness

  • 13,500 ISO lumens
  • 12,500 Centre lumens
  • 12,000 ANSI lumens

​Colour wheel​

  • 4 Segment (RGBY) - 2X or 3X speed

Contrast (nominal)

  • 1200:1 Full On/Off; 250:1 ANSI
Display

Type

  • 1-chip 0.96” DMD

Native resolution

  • 1920 x 1200 (2,304,000 pixels) 16:10
Illumination system

Type

  • Laser Phosphor with Christie BoldColor Technology

illumination performance

  • 20,000 hours to half brightness
<
Signal inputs

Standard

  • HDMI x 2 (One on rear panel, one on bottom of projector, independently selectable)
  • 3GSDI x 1 (BNC)
  • DVI-D x 1 (Digital only)
  • HD15 x 1
  • USB x 1 (Type B mini) - Display over USB
  • USB x 1 (type A) - Image Viewer or WiFi Dongle (optional)
  • HDBaseT (RJ45 x 1)
  • RJ45 x 1 (ChristiePresenter over wired network connection)

3D

  • HDMI 1.4, HDBaseT - Frame Packed, Top/Bottom, Side By Side
  • Up to 120Hz output
  • 3D Sync In (BNC) - for genlocking projectors
  • 3D Sync Out (BNC) - for genlocking projectors or controlling emitters

Signals

  • HDTV formats VGA through to WUXGA (1920 x 1200)
  • Horizontal and vertical scaling while maintaining aspect ratio, all inputs

Pixel clock

  • 162MHz

Scan rates

  • Horizontal: 15kHz to 91kHz
  • Vertical: 24Hz to 85Hz
Signal outputs

Monitor out (loop through)

  • 3GSDI x 1 (BNC)
  • DVI-D x 1 (Digital only)
Control and networking
  • RS232 In
  • Control via HDBaseT
  • Ethernet (10/100) RJ45 with ChristieNET connectivity
  • Built-in Backlit Keypad
  • Wired Remote Control (3.5mm stereo) - Loop out available for daisy chaining
Accessories

Standard

  • IR Remote w/ wired remote jack (wire not included)
  • AC Line cords for projector Head
  • User Manual

Optional

  • Christie One Rigging Frame
  • Lens Adapter for E Series Lenses
  • 1DWUSB-BGN (Wireless Dongle for video and control)
  • HS Fog Filter Covers + Filters (Order once per projector then only filters refills)
  • HS Fog Filter Refills (1 set)
  • Christie One Mount Plus
  • One Mount Extender Rod
  • One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod)
  • Replacement Remote Control
Lens mount
  • Boresight adjustable
  • Motorised horizontal and vertical lens offset (Memory Available)
  • Motorised zoom and focus adjustment (Memory Available for Full ILS lenses)
Lens options

Lenses

  • 0.84-1.02:1 Zoom Lens (No Zoom/Focus Memory) - Adapted 1.2-1.5:1 E Series Lens
  • 1.02-1.36:1 Zoom Lens (No Zoom/Focus Memory) - Adapted 1.5-2.0:1 E Series Lens
  • 1.2-1.5:1 Zoom Lens (Full ILS)
  • 1.5-2.0:1 Zoom Lens (Full ILS)
  • 2.0-4.0:1 Zoom Lens (Full ILS)
  • 4.0-7.0:1 Zoom Lens (Full ILS)

Offsets (Full ILS lenses)

  • +/- 120% Vertical (+/- 720 pixels)
  • +/- 50% Horizontal (+/- 480 pixels)

Offsets 0.84-1.02:1

  • +37 / -60% Vertical (+222/-363 pixels)
  • +15 / -44% Horizontal (+152/-426 pixels)

Offsets 1.02-1.36:1

  • +51 /-53% Vertical (+307/-318 pixels)
  • ​+11 / -50% Horizontal (+107/-480 pixels)
Power requirements

Operating voltage

  • Normal: 110–240V AC @ 50/60Hz

Power consumption

  • Normal Mode: 1250W +/-15% (220V),  1300W +/-15% (110V)
  • ECO1 Mode: 1020W +/-15% (220V), 1050W +/-15%(110V)
  • ECO2 Mode: 700W +/-15% (220V), 700W +/-15%(110V)

Operating current

  • Normal Mode: 6.0A +/-15% (220V), 11.9A +/-15% (110V)
  • ECO1 Mode: 4.7A +/-15% (220V), 9.6A +/-15% (110V)
  • ECO2 Mode: 6.5A +/-15% (220V), 3.2A +/-15% (110V)

Dissipation

  • Normal Mode: 4450 BTU/hr
  • ECO1 Mode: 3600 BTU/hr
  • ECO2 Mode: 2450 BTU/hr
Audible noise
  • Typical: 465W: 39dB(A)
  • Eco Mode: 370W: 37dB(A)
Physical specs

Dimensions

  • (L x W x H) 26.65" x 23.46" x 7.99" (677 x 596 x 203mm) without feet

Weight (without lens)

  • 93.7lbs (42.5kg)

Shipping dimensions

  • (L x W x H) 36.34" x 33.19" x 20.20" (923 x 843 x 513mm)

Shipping weight

  • 119lbs (54kg)
Operating environment
  • Temp: 0 to 40°C (32 to 104°F)
  • Humidity: 0 - 85% non-condensing
Regulatory
  • UL/CSA/IEC 60950-1
  • FCC Class A
  • CE
  • FDA
  • CCC
  • KC
  • PSE
  • CU
  • SABS
  • BIS
  • VCCI
  • RCM
  • Ukr
  • TER
  • SASO

This product conforms to all relevant European directives, standards, safety, health and environmental concerns

  • RoHS
  • REACH
  • WEEE

Which HS Series is right for you?

  D13HD-HS / D13WU-HS D16HD-HS /  D16WU-HS D20HD-HS /  D20WU-HS 4K7-HS / 4K10-HS
BoldColor Tick Tick Tick Tick
Omnidirectional Tick Tick Tick Tick
Christie Twist Tick Tick Tick
Long-life laser light source Tick Tick Tick Tick
Christie Virtual Remote Tick Tick Tick Tick
Weighs < 80lbs/36kg Tick
Lens compatibility Tick Tick Tick Tick
Advanced electronics Tick Tick Tick
15A/120V operation Tick Tick Tick
4K UHD resolution Tick
12G SDI input Tick
HDR10 compatible Tick Tick Tick
4K60Hz compatibility Tick
OPS slot Tick
SDVoE (Terra) Tick

*4 out of 6 lenses are compatible – see spec sheet for details.

Christie maintenance services

1. Protect your investment in Christie products

From preventative projector maintenance to light engine cleaning, Christie maintenance services help optimize the safety, efficiency, brightness and lifetime of your Christie projector. We have the expertise, the tools and a state-of-the-art ISO 6 – Class 1000 cleanroom. We’re here for you!

Did you know? Failing to perform maintenance services can actually void your products’ warranty. And all maintenance services must be performed by Christie accredited service technicians. Please refer to the user manual of your Christie projector for detailed guidelines.

2. Preventative projector maintenance – available for all projectors

We offer 3 levels of preventative maintenance for Christie projectors:

  • Level 1 – Includes a 60-point inspection, cleaning, new air filter, and any needed software upgrades. We also confirm convergence, verify color quality, test all inputs, check audio/video and computer imaging, test focus and zoom, and more.
  • Level 2 – Includes Level 1, plus we remove all covers and any dust from within the projector, clean the light engine, and lamp reflector if applicable.
  • Level 3 – Includes Levels 1 and 2, plus a full optical alignment and correction, including lamp adjustments, boresight, fold mirror and integrator alignments.

3. Bring back brightness with 3DLP projector light engine cleaning

When dust and debris accumulates, your projector loses lumens. A clean light engine can bring back brightness! When you send us your 3DLP® light engine for cleaning, we disassemble, clean and reassemble it, then realign it to maximize light output. It’s only possible at Christie: Using proprietary technology and software, we also align your 3DLP chips and colors for maximum optical output. Your cleaned light engine leaves with a 1-year warranty.

4. Did you know? Even sealed projector light engines benefit from regular cleaning

Sealed light engines reduce the impact of dust and debris on projector optics, which in turn helps extend life. Send us your light engine for sealing. We disassemble, clean and re-assemble it, re-align to maximize light output and then seal it for added protection. Your sealed light engine leaves with a 1-year warranty.

Note: Not all projector light engines can be sealed. Contact Christie Technical Support to find out if yours can.

5. Our promise

During any Christie maintenance service, if we determine that any additional work or parts are required, we’ll contact you, provide a quote and estimated turnaround time, and only proceed with your approval.

Need Christie maintenance services for your equipment?

Contact Christie Technical Support today!

By phone - Call toll-free (800) 221-8025 and select option #3
By email at support.americas@christiedigital.com

Hours of operation (in the Americas)
Monday – Friday
5:00 a.m. – 5:00 p.m. Pacific Time
8:00 a.m. – 8:00 p.m. Eastern Time